2014 Chevrolet SS Owner Manual - Page 339
2014 Chevrolet SS Manual
Page 339 highlights
Vehicle Care The kit includes: Check the tire sealant expiration date on the sealant canister. The sealant canister should be replaced before its expiration date. Replacement sealant canisters are available at your local dealer. See "Removal and Installation of the Sealant Canister" following. There is only enough sealant to seal one tire. After usage, the sealant canister and sealant/air hose assembly must be replaced. See "Removal and Installation of the Sealant Canister" following. 1. On/Off Switch 2. Pressure Gauge 3. Tire Sealant Canister 4. Air Only Hose 5. Sealant/Air Hose 6. Power Plug Tire Sealant Read and follow the safe handling instructions on the label adhered to the sealant canister. Using the Tire Sealant and Compressor Kit to Temporarily Seal and Inflate a Punctured Tire When using the tire sealant and compressor kit during cold temperatures, warm the kit in a heated environment for five minutes. This will help to inflate the tire faster. 10-57 If a tire goes flat, avoid further tire and wheel damage by driving slowly to a level place. Turn on the hazard warning flashers. See Hazard Warning Flashers on page 6-3. See If a Tire Goes Flat on page 10-54 for other important safety warnings. Do not remove any objects that have penetrated the tire. 1. Remove the tire sealant and compressor kit from its storage location. See Storing the Tire Sealant and Compressor Kit on page 10-62. 2. Remove the sealant/air hose (5) from the side of the compressor. 3. Remove the power plug (6). 4. Place the kit on the ground. Make sure the tire valve stem is positioned close to the ground so the hose will reach it. 5. Remove the valve stem cap from the flat tire by turning it counterclockwise.