2010 Chrysler Town & Country Owner Manual - Page 156
2010 Chrysler Town & Country Manual
Page 156 highlights
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 155 11. Select ЉRemote Linked to MemoryЉ in the Electronic Vehicle Information Center (EVIC) and enter "Yes". Refer to "Electronic Vehicle Information Center (EVIC)/ Customer-Programmable Features" in "Understanding Your Instrument Panel" for further information. To recall the memory setting for driver two, press MEMORY button 2 on the driver's door or the UNLOCK button on the RKE transmitter linked to Memory Position 2. A recall can be cancelled by pressing any of the 12. Repeat the above steps to set the next Memory MEMORY buttons on the driver's door during a recall (S, position using the other numbered Memory button or to 1, or 2). When a recall is cancelled, the driver's seat, driver's mirror, and the pedals stop moving. A delay of link another RKE transmitter to memory. one second will occur before another recall can be Memory Position Recall selected. NOTE: The vehicle must be in PARK to recall memory To Disable RKE Transmitter Linked to Memory positions. If a recall is attempted when the vehicle is not 1. Turn the ignition switch to the OFF position and in PARK, a message will be displayed in the EVIC. remove the key. To recall the memory settings for driver one, press MEMORY button 1 on the driver's door or the UNLOCK 2. Press and release MEMORY button 1. The system will button on the RKE transmitter linked to memory position recall any memory settings stored in position 1. Wait for the system to complete the memory recall before continu1. ing to Step 3. 3