2010 Chrysler Town & Country Owner Manual - Page 262

UNDERSTANDING YOUR INSTRUMENT PANEL 261 unlocked with the RKE transmitter. To make your selec- NOTE: If your vehicle has experienced any damage in tion, press and release the RESET button until "OFF," the area where the sensor is located, even if the fascia is not damaged, the sensor may have become misaligned. "30 sec.," "60 sec.," or "90 sec." appears. Take your vehicle to an authorized dealer to verify sensor Blind Spot Alert alignment. Having a sensor that is misaligned will result There are three selections when operating Blind Spot in the BSM not operating to specification. Alert. By pressing and releasing the RESET button once, the Blind Spot Alert feature can be activated in "Blind Enable/Disable the Rear Park Assist System Spot Alert Lights" mode. When this mode is selected the The Rear Park Assist system will scan for objects behind Blind Spot Monitor (BSM) system is activated and will the vehicle when the transmission is in the REVERSE and only show a visual alert in the outside mirrors. By the vehicle speed is less than 11 mph (18 km/h). The pressing and releasing the RESET button a second time system can be enabled with Sound Only, Sound and "Blind Spot Alert Lights/CHM" mode is activated. In Display, or turned OFF through the EVIC, to make your this mode the Blind Spot Monitor (BSM) will show a selection, press and release the RESET button. Refer to visual alert in the outside mirrors as well as an audible "Rear Park Assist System" in "Understanding The Feaalert when the turn signal is on. When "Blind Spot Alert tures Of Your Vehicle" for system function and operating Off" is selected the Blind Spot Monitor (BSM) system is information. deactivated. 4