2010 Chrysler Town & Country Owner Manual - Page 67

66 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE front passenger seat is unoccupied. The BeltAlert௡ warning system may be triggered when an animal or heavy object is on the front passenger seat or when the seat is folded flat (if equipped). It is recommended that pets be restrained in the rear seat in pet harnesses or pet carriers that are secured by seat belts and cargo is properly stowed. 2. Turn the ignition switch to the ON position (do not start the engine), and wait for the Seat Belt Reminder Light to turn off. 3. Within 60 seconds of turning the ignition switch to the ON/RUN position, unbuckle and then re-buckle the driver's seat belt at least three times within 60 seconds, ending with the seat belt buckled. BeltAlert௡ Programming NOTE: Watch for the Seat Belt Reminder Light to turn BeltAlert௡ can be enabled or disabled by your authorized on while unbuckling and off while re-buckling the seat dealer or by following these steps: belt. NOTE: The following steps must occur within the first 4. Turn the ignition switch to the LOCK position. A 60 seconds of the ignition switch being turned to the ON single chime will sound to signify that you have successor START position. Chrysler Group LLC does not recomfully completed the programming. mend deactivating BeltAlert௡. BeltAlert௡ can be reactivated by repeating this procedure. 1. With all doors closed and the ignition switch in any position except ON or START, buckle the driver's seat belt.