2010 Chrysler Town & Country Owner Manual - Page 22
2010 Chrysler Town & Country Manual
Page 22 highlights
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 21 Remote Unlock Doors and Liftgate Press and release the UNLOCK button on the RKE transmitter once to unlock the driver's side or twice to unlock all doors and liftgate. The Illuminated Entry system also turns on. 1. Perform this operation while standing outside the vehicle. 2. Press and hold the LOCK button on a programmed RKE transmitter for at least 4 seconds, but no longer than 10 seconds. Then, press and hold the UNLOCK button while still holding the LOCK button. 2 Remote Key Unlock on First Press This feature lets you program the system to unlock either 3. Release both buttons at the same time. the driver's side, or all doors, on the first press of the 4. Test the feature while outside of the vehicle by pressUNLOCK button on the RKE transmitter. ing the LOCK/UNLOCK buttons on the RKE transmitter • For vehicles equipped with an Electronic Vehicle Inwith the ignition switch in the LOCK position and the formation Center (EVIC), refer to "Electronic Vehicle Key Fob removed. Information Center (EVIC)/Personal Settings (Customer-Programmable Features)" in "Understand- 5. Repeat these steps if you want to return this feature to its previous setting. ing Your Instrument Panel" for further information. • For vehicles not equipped with the EVIC, the Remote Unlock feature can be enabled or disabled by performing the following steps: