2010 Dodge Charger Owner Manual - Page 191

190 UNDERSTANDING YOUR INSTRUMENT PANEL 2. Fully depress the accelerator pedal slowly three times Press the SCROLL button to cycle through all the Trip Computer functions. within 10 seconds. 3. Turn the ignition switch to the LOCK position. The Trip Functions mode displays the following. NOTE: If the indicator message illuminates when you • Average Fuel Economy / Fuel Saver Mode - If Equipped start the vehicle, the oil change indicator system did not Shows the average fuel economy since the last reset. reset. If necessary, repeat this procedure. When the fuel economy is reset, the display will read Trip Functions "RESET" or show dashes for two seconds. Then, the Press and release the MENU button until one of the history information will be erased, and the averaging will following Trip Functions displays in the EVIC: continue from the last fuel average reading before the • Average Fuel Economy/Fuel Saver Mode reset. • Distance To Empty • Trip A • Trip B • Elapsed Time • Display Units of Measure in The FUEL SAVER MODE message will display above the average fuel economy in the EVIC display. This message will appear whenever MDS (if equipped) allows the engine to operate on four cylinders, or if you are driving in a fuel efficient manner.