2010 Dodge Charger Owner Manual - Page 391

390 MAINTAINING YOUR VEHICLE Windshield Wiper Blades Clean the rubber edges of the wiper blades and the windshield periodically with a sponge or soft cloth and a mild nonabrasive cleaner. This will remove accumulations of salt or road film. present please proceed to clean wiper blades with humid cloth removing any debris that may be affecting its function. Adding Washer Fluid The windshield washer fluid reservoir is located in the Operation of the wipers on dry glass for long periods front of the engine compartment. Be sure to check the may cause deterioration of the wiper blades. Always use fluid level at regular intervals. Fill the reservoir with washer fluid when using the wipers to remove salt or dirt windshield washer solvent (not radiator antifreeze) and operate the system for a few seconds to flush out the from a dry windshield. residual water. Avoid using the wiper blades to remove frost or ice from the windshield. Keep the blade rubber out of contact with When refilling the washer fluid reservoir, apply some washer fluid to a cloth or towel and wipe the wiper petroleum products such as engine oil, gasoline, etc. blades clean. This will help blade performance. NOTE: Life expectancy of wiper blades varies depending on geographical area and frequency of use. Poor To prevent freeze-up of your windshield washer system performance of blades may be present with chattering, in cold weather, select a solution or mixture that meets or marks, water lines or wet spots. If any condition is exceeds the temperature range of your climate. This rating information can be found on most washer fluid containers.