2010 Dodge Charger Owner Manual - Page 32

THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 31 4. A single chime will indicate the completion of the Automatic Door Locks Programming The Automatic Door Locks feature can be enabled or programming. disabled as follows: 5. Cycle the ignition after performing steps one to four • For vehicles equipped with the Electronic Vehicle for the feature to be enabled or disabled. Information Center (EVIC), refer to "Electronic Vehicle 6. Repeat these steps if you want to return this feature to Information Center (EVIC) - If Equipped/Personal its previous setting. Settings (Customer-Programmable Features)" in "Understanding Your Instrument Panel" for further infor- NOTE: Use the Automatic Door Locks feature in accordance with local laws. mation. • For vehicles not equipped with the EVIC, perform the Automatic Unlock Doors on Exit The doors will unlock automatically on vehicles with following procedure: power door locks if: 1. Close all doors and place the Key Fob in the ignition 1. The Automatic Unlock Doors On Exit feature is enswitch. abled. 2. Cycle the ignition switch between LOCK and ON and then back to LOCK four times ending up in the LOCK 2. The transmission was in gear and the vehicle speed returned to 0 mph (0 km/h). position (do not start the engine). 3. Press the power door LOCK switch to lock the doors. 3. The transmission is in NEUTRAL or PARK. 2