2010 Dodge Charger Owner Manual SRT8 - Page 325

324 WHAT TO DO IN EMERGENCIES TIREFIT Usage Precautions • Replace the TIREFIT Sealant Bottle (1) and Sealant Hose (6) prior to the expiration date (printed on the bottle label) to assure optimum operation of the system. Refer to "Sealing a Tire with TIREFIT" section (F) "Sealant Bottle and Hose Replacement". • The Sealant Bottle (1) and Sealant Hose (6) is a one tire application use. After each use, always immediately replace these components at an authorized dealer. • You can use the TIREFIT air pump to inflate bicycle tires. The kit also comes with two needles located in the Accessory Storage Compartment (located on the bottom of the air pump) for inflating sport balls, rafts, or like inflatable items. However, use only the Air Pump Hose (7) and make sure the Mode Select Knob (5) is in the Air Mode when inflating such items to avoid injecting sealant into them. The TIREFIT Sealant is only intended to seal punctures less than 1⁄4" (6mm) diameter in the tread of your vehicle. • When the TIREFIT sealant is in a liquid form, clean • Do not lift or carry TIREFIT kit by hoses. water, and a damp cloth will remove the material from WARNING! the vehicle or tire and wheel components. Once the sealant dries, it can easily be peeled off and properly • Do not attempt to seal a tire on the side of the discarded. vehicle close to traffic. Pull far enough off the road • For optimum performance, make sure the valve stem to avoid the danger of being hit when using the on the wheel is free of debris before connecting the TIREFIT kit. TIREFIT kit. (Continued)