2010 Dodge Charger Owner Manual SRT8 - Page 71
2010 Dodge Charger Manual
Page 71 highlights
70 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE means of adjusting the tension in the strap. Forward- NOTE: facing toddler restraints and some rear-facing infant • Ensure that the tether strap does not slip into the opening between the seatbacks as you remove slack in restraints will also be equipped with a tether strap, a the strap. hook for attachment to the tether strap anchorage and a means of adjusting the tension of the strap. • When using the LATCH attaching system to install a child restraint, please ensure that all seat belts not You will first loosen the adjusters on the lower straps and being used for occupant restraints are stowed and out on the tether strap so that you can more easily attach the of reach of children. It is recommended that before hooks or connectors to the vehicle anchorages. Next, installing the child restraint, buckle the seat belt so the attach the lower hooks or connectors over the top of the seat belt is tucked behind the child restraint and out of seatcover material. Then rotate the tether anchorage reach. If the buckled seat belt interferes with the child cover directly behind the seat where you are placing the restraint installation, instead of tucking the seat belt child restraint and attach the tether strap to the anchorbehind the child restraint, route the seat belt through age, being careful to route the tether strap to provide the the child restraint belt path and then buckle it. This most direct path between the anchor and the child should stow the seat belt out of the reach of an restraint. Finally, tighten all three straps as you push the inquisitive child. Remind all children in the vehicle child restraint rearward and downward into the seat, that the seat belts are not toys and should not be removing slack in the straps according to the child played with, and never leave your child unattended in restraint manufacturer's instructions. the vehicle.