2010 Dodge Charger Owner Manual SRT8 - Page 332

WHAT TO DO IN EMERGENCIES 331 5. Replace the Sealant Bottle (1) and Sealant Hose (6) 4. Clean any remaining sealant from the TIREFIT housassembly at your authorized dealer as soon as possible. ing. Refer to "(F) Sealant Bottle and Hose Replacement." 5. Position the new Sealant Bottle (1) to the housing so NOTE: When having the tire serviced advise the autho- that the Sealant Hose (6) aligns with the hose slot in the rized dealer or service center that the tire has been sealed front of the housing and the alignment keys on the bottom of the bottle align with the alignment slots in the using the TIREFIT service kit. housing. Then, press the bottle into the housing. An (F) Sealant Bottle and Hose Replacement: audible click will be heard, indicating the bottle is locked 1. Uncoil the Sealant Hose (6). in place. 2. Locate the rectangular Sealant Bottle release button in 6. Verify the yellow cap is installed on the fitting at the the recessed area where you place your fingers to unlatch end of the Sealant Hose (6) and return the hose to its the hoses (6) (7) from their storage area. storage area (located on the bottom of the air pump). 3. Use the yellow cap on end of the Sealant Hose (6) to 7. Return the TIREFIT kit to its storage location in the depress the Sealant Bottle release button. The Sealant vehicle. Bottle (1) will pop up. Remove the bottle and dispose of it accordingly. 6