2010 Dodge Charger Owner Manual SRT8 - Page 48

THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 47 For front passenger seats equipped with BeltAlert, your vehicle is equipped to detect when it is occupied. The BeltAlert௡ warning system is not activated when the front passenger seat is unoccupied. The BeltAlert௡ warning system may be triggered when an animal or heavy object is on the front passenger seat or when the seat is folded flat (if equipped). It is recommended that pets be restrained in the rear seat in pet harnesses or pet carriers that are secured by seat belts and cargo is properly stowed. BeltAlert௡ Programming The BeltAlert௡ can be enabled or disabled by your authorized dealer or by performing the following procedure: 1. With all doors closed, and the ignition switch in any position except ON or START, buckle the driver's seat belt. 2. Turn the ignition switch to the ON position, but do not start the engine. Wait for the Seat Belt Reminder Light to turn off and then proceed to the next step. NOTE: You must perform the following steps within 60 seconds of turning the ignition switch to the ON position. 3. Within 60 seconds of turning the ignition switch to the ON position, unbuckle and then re-buckle the driver's seat belt at least three times within 10 seconds, ending with the seat belt buckled. 2 NOTE: Chrysler Group LLC does not recommend de- NOTE: Watch for the Seat Belt Reminder Light to turn activating the BeltAlert௡. on while unbuckling the seat belt and turn off while re-buckling the seat belt. It may be necessary to retract the seat belt.