2011 Dodge Challenger Owner Manual SRT8 - Page 184

182 UNDERSTANDING YOUR INSTRUMENT PANEL Your vehicle has also been equipped with a TPMS CAUTION! malfunction indicator to indicate when the system is not operating properly. The TPMS malfunction indicator is The TPMS has been optimized for the original combined with the low tire pressure telltale. When the equipment tires and wheels. TPMS pressures and system detects a malfunction, the telltale will flash for warning have been established for the tire size approximately one minute and then remain continuously equipped on your vehicle. Undesirable system operailluminated. This sequence will continue upon subse- tion or sensor damage may result when using requent vehicle start-ups as long as the malfunction exists. placement equipment that is not of the same size, When the malfunction indicator is illuminated, the sys- type, and/or style. Aftermarket wheels can cause tem may not be able to detect or signal low tire pressure sensor damage. Do not use tire sealant from a can or as intended. TPMS malfunctions may occur for a variety balance beads if your vehicle is equipped with a of reasons, including the installation of replacement or TPMS, as damage to the sensors may result. alternate tires or wheels on the vehicle that prevent the TPMS from functioning properly. Always check the 23. Anti-Lock Brake (ABS) Light TPMS malfunction telltale after replacing one or more This light monitors the Anti-Lock Brake System tires or wheels on your vehicle, to ensure that the (ABS). The light will turn on when the ignition replacement or alternate tires and wheels allow the TPMS switch is placed in the ON/RUN position and to continue to function properly. may stay on for as long as four seconds.