2011 Dodge Challenger Owner Manual SRT8 - Page 399

MAINTAINING YOUR VEHICLE 397 WARNING! A transient high tension occurs at the bulb sockets of HID headlamps when the headlamp switch is turned ON. It may cause serious electrical shock or electrocution if not serviced properly. See your authorized dealer for service. Front/Rear Side Marker Lamp 1. Remove the front/rear side marker. Use a fiber stick or similar tool to gently pry the lamp on the outboard side to disengage the clip. NOTE: • If a screwdriver is used, make sure a soft material is placed between the vehicle body and tool so not to scratch the paint. NOTE: On vehicles equipped with HID headlamps, when the headlamps are turned on, there is a blue hue to 2. Rotate the bulb's socket counterclockwise, and remove the lamps. This diminishes and becomes more white after the bulb and socket assembly from the housing. approximately 10 seconds, as the system charges. 3. Pull the bulb out of the socket and insert the replacement bulb. 4. Install the bulb and socket assembly into the housing, and rotate the socket clockwise to lock it in place. 5. Reinstall the front/rear side marker. 7