2011 Dodge Challenger Owner Manual SRT8 - Page 78
2011 Dodge Challenger Manual
Page 78 highlights
76 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE hook for attachment to the tether strap anchorage and a NOTE: • Ensure that the tether strap does not slip into the means of adjusting the tension of the strap. opening between the seatbacks as you remove slack in You will first loosen the child seat adjusters on the lower the strap. straps and on the tether strap so that you can more easily attach the hooks or connectors to the vehicle anchorages. • When using the LATCH attaching system to install a child restraint, please ensure that all seat belts not Next, attach the lower hooks or connectors over the top being used for occupant restraints are stowed and out of the seatcover material. Then, rotate the tether anchorof reach of children. It is recommended that before age cover directly behind the seat where you are placing installing the child restraint, buckle the seat belt so the the child restraint and attach the tether strap to the seat belt is tucked behind the child restraint and out of anchorage, being careful to route the tether strap to reach. If the buckled seat belt interferes with the child provide the most direct path between the anchor and the restraint installation, instead of tucking the seat belt child restraint. Finally, tighten all three straps as you behind the child restraint, route the seat belt through push the child restraint rearward and downward into the the child restraint belt path and then buckle it. This seat, removing slack in the straps according to the child should stow the seat belt out of the reach of an restraint manufacturer's instructions. inquisitive child. Remind all children in the vehicle that the seat belts are not toys and should not be played with, and never leave your child unattended in the vehicle.
![](/manual_guide/autos/Dodge-2011-Challenger-SRT8-Owner-Manual-SRT8-b57c04/78.png)