2011 Dodge Challenger Owner Manual SRT8 - Page 342

340 WHAT TO DO IN EMERGENCIES hose, and place the TIREFIT kit in the vehicle storage location. Quickly proceed to (D) "Drive Vehicle". WARNING! TIREFIT is not a permanent flat tire repair. Have the tire inspected and repaired or replaced after using TIREFIT. Do not exceed 55 mph (88 km/h) until the tire is repaired or replaced. Failure to follow this warning can result in injuries that are serious or fatal to you, your passengers, and others around you. (E) After Driving: Pull over to a safe location. Refer to "Whenever You Stop to Use TIREFIT" before continuing. CAUTION! • The metal end fitting from Power Plug (8) may get hot after use, so it should be handled carefully. • Failure to reinstall the cap on the fitting at the end of the Sealant Hose (6) can result in sealant contacting your skin, clothing, and the vehicle's interior. It can also result in sealant contacting internal TIREFIT kit components which may cause permanent damage to the kit. 1. Turn the Mode Select Knob (5) to the Air Mode position. (D) Drive Vehicle: Immediately after injecting sealant and inflating the tire, 2. Uncoil the power plug and insert the plug into the drive the vehicle 5 miles (8 km) or 10 minutes to ensure vehicle's 12 Volt power outlet. distribution of the TIREFIT Sealant within the tire. Do not exceed 55 mph (88 km/h).