2011 Dodge Challenger Owner Manual SRT8 - Page 343

WHAT TO DO IN EMERGENCIES 341 3. Uncoil the Air Pump Hose (7) (black in color) and 2. Disconnect the TIREFIT kit from the valve stem, screw the fitting at the end of hose (7) onto the valve reinstall the cap on the valve stem and unplug from 12 stem. Volt outlet. 4. Check the pressure in the tire by reading the Pressure 3. Place the TIREFIT kit in its proper storage area in the Gauge (3). vehicle. If tire pressure is less than 19 psi (1.3 Bar) , the tire is too 4. Have the tire inspected and repaired or replaced at the badly damaged. Do not attempt to drive the vehicle earliest opportunity at an authorized dealer or tire serfurther. Call for assistance. vice center. 5. Replace the Sealant Bottle (1) and Sealant Hose (6) assembly at your authorized dealer as soon as possible. 1. Press the Power Button (4) to turn on TIREFIT and Refer to "(F) Sealant Bottle and Hose Replacement." inflate the tire to the pressure indicated on the tire and loading information label on the driver-side door open- NOTE: When having the tire serviced, advise the auing. thorized dealer or service center that the tire has been sealed using the TIREFIT service kit. NOTE: If the tire becomes over-inflated, press the Deflation Button to reduce the tire pressure to the recommended inflation pressure before continuing. If the tire pressure is 19 psi (1.3 bar) or higher: 6