2011 Dodge Challenger Owner Manual SRT8 - Page 344
2011 Dodge Challenger Manual
Page 344 highlights
342 WHAT TO DO IN EMERGENCIES (F) Sealant Bottle And Hose Replacement: 1. Uncoil the Sealant Hose (6) (clear in color). 6. Verify that the cap is installed on the fitting at the end of the Sealant Hose (6) and return the hose to its storage area (located on the bottom of the air pump). 2. Locate the round Sealant Bottle release button in the 7. Return the TIREFIT kit to its storage location in the recessed area under the sealant bottle. vehicle. 3. Press the Sealant Bottle release button. The Sealant Bottle (1) will pop up. Remove the bottle and dispose of JUMP-STARTING PROCEDURES If your vehicle has a discharged battery it can be jumpit accordingly. started using a set of jumper cables and a battery in 4. Clean any remaining sealant from the TIREFIT hous- another vehicle or by using a portable battery booster ing. pack. Jump-starting can be dangerous if done improperly 5. Position the new Sealant Bottle (1) in the housing so so please follow the procedures in this section carefully. that the Sealant Hose (6) aligns with the hose slot in the NOTE: When using a portable battery booster pack front of the housing. Press the bottle into the housing. An follow the manufacturer's operating instructions and audible click will be heard indicating the bottle is locked precautions. into place.