2011 Dodge Dakota Extended Cab Owner Manual - Page 147

146 UNDERSTANDING THE FEATURES OF YOUR VEHICLE To Deactivate A soft tap on the brake pedal, normal braking, or pressing the CANCEL button will deactivate the speed control without erasing the memory. Pushing the ON/OFF button to the OFF position or turning off the ignition erases the memory. To Vary the Speed Setting When the Electronic Speed Control System is ON, the speed can be increased by pressing and holding the RESUME/ACCEL button. When the button is released, a new set speed will be established. Tapping the ACCEL button once will result in a 1 mph (2 km/h) increase in set speed. Each subsequent tap of the button results in an increase of 1 mph (2 km/h). Tapping the DECEL button once will result in a speed decrease of 1 mph (2 km/h). Each time the button is tapped, speed will decrease. For example, tapping the button three times will decrease the speed by 3 mph (4.8 km/h). WARNING! Leaving the Electronic Speed Control ON when not in use is dangerous. You could accidentally set the Electronic Speed Control to cause it to go faster than you want. You could lose control and have a collision. Always leave the system OFF when you are not using it. Tapping the DECEL button once will result in a 1 mph (2 km/h) decrease in set speed. Each subsequent tap of To Resume Speed To resume a previously set speed, push and release the the button results in a decrease of 1 mph (2 km/h). RESUME button. Resume can be used at any speed above 20 mph (32 km/h).