2011 Dodge Dakota Extended Cab Owner Manual - Page 185

184 UNDERSTANDING YOUR INSTRUMENT PANEL damaged, a "noFUSE" message will display in the odom- cluster. To reset the oil change indicator system (after eter display area. For further information on fuses and performing the scheduled maintenance), refer to the fuse locations refer to "Fuses" in "Maintaining Your following procedure: Vehicle". 1. Turn the ignition switch to the ON/RUN position CHAngE OIL Message (do not start the engine). Your vehicle is equipped with an engine oil change 2. Fully depress the accelerator pedal slowly three indicator system. The "CHAngE OIL" message will flash times within 10 seconds. in the instrument cluster odometer for approximately 12 seconds after a single chime has sounded, to indicate 3. Turn the ignition switch to the OFF/LOCK position. the next scheduled oil change interval. The engine oil NOTE: If the indicator message illuminates when you change indicator system is duty cycle based, which start the vehicle, the oil change indicator system did not means the engine oil change interval may fluctuate reset. If necessary, repeat this procedure. dependent upon your personal driving style. 16. Odometer Display Unless reset, this message will continue to display each The odometer display shows the total distance the vetime you turn the ignition switch to the ON/RUN hicle has been driven. position. To turn off the message temporarily, press and release the Trip Odometer button on the instrument