2011 Dodge Dakota Extended Cab Owner Manual - Page 265

264 STARTING AND OPERATING N 2WD Rear-Wheel Drive High - This range is used for normal Neutral - This range disengages both the front and rear street and highway driving on dry, hard-surfaced roads. driveshafts from the powertrain, and is used for flat towing behind another vehicle. Refer to "Recreational 4WD LOCK Towing" in "Starting and Operating" for further Four-Wheel Drive Lock - This range locks the front and information. rear driveshafts together forcing the front and rear wheels to rotate at the same speed. This range provides Shifting Procedure - NV233/243 Transfer Case additional traction for loose or slippery road surfaces NOTE: If any of the requirements to select a new only. transfer case position have not been met, the transfer case will not shift, the indicator light for the previous position 4WD LOW Four-Wheel Drive Low - This range provides low speed will remain ON, and the newly-selected position indicafour-wheel drive. It locks the front and rear driveshafts tor light will continue to flash until all the requirements together, forcing the front and rear wheels to rotate at the for the selected position have been met. To retry a shift: same speed. This range provides additional traction and return the transfer case switch back to the original maximum pulling power for loose or slippery road position, make certain all shift requirements have been met, wait five seconds, and try the shift again. surfaces only. Do not exceed 25 mph (40 km/h).