2011 Dodge Dakota Extended Cab Owner Manual - Page 91

90 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Uconnect™ Phone Button The radio or steering wheel controls (if equipped) will contain the two control buttons button and Voice (Uconnect™ Phone button) that will enable you Command to access the system. When you press the button you will hear the word Uconnect™ followed by a BEEP. The beep is your signal to give a command. Voice Command Button Actual button location may vary with the radio. The individual buttons are described in the "Operation" section. The Uconnect™ Phone is fully integrated with the vehicle's audio system. The volume of the Uconnect™ Phone can be adjusted either from the radio volume control knob or from the steering wheel radio control (right switch), if so equipped. The radio display will be used for visual prompts from the Uconnect™ Phone such as "CELL" or caller ID on certain radios. Operation Voice commands can be used to operate the Uconnect™ Phone and to navigate through the Uconnect™ Phone menu structure. Voice commands are required after most Uconnect™ Phone prompts. You will be prompted for a The Uconnect™ Phone can be used with any Hands-Free specific command and then guided through the available Profile certified Bluetooth௡ mobile phone. See the options. Uconnect™ website for supported phones. Refer to your mobile service provider or the phone manufacturer for • Prior to giving a voice command, one must wait for the beep, which follows the "Ready" prompt or andetails. other prompt.