2011 Dodge Ram 1500 Crew Cab User Guide - Page 60
2011 Dodge Ram 1500 Crew Cab Manual
Page 60 highlights
UTILITY NOTE: Provisions are provided in the bins for cargo dividers and shelf supports. These accessories (in addition to other RamBox® accessories) are available from MOPAR®. • Rotate the side gates closed allowing the outboard ends to be positioned in front of the cargo tie-down loops. • Rotate the center handle horizontally to secure the side gates in the closed position. • Lock the center handle using the vehicle key to secure the panel into place and assist against theft. Divider Position • There are 11 divider slots along the bed inner panels which allow for various positions to assist in managing your cargo. • To install the bed extender into a divider position perform the following: • Make sure the center handle is unlocked using the vehicle key and rotate the center handle vertically to release the extender side gates. • With the side gates open, position the extender so the outboard ends align with the intended slots in the sides of the bed. • Rotate the side gates closed so that the outboard ends are secured into the intended slots of the bed. • Rotate the center handle horizontally to secure the side gates in the closed position. • Lock the center handle to secure the panel into place and assist against theft. RamBox® Storage Bin Cover Emergency Release Lever • As a security measure, a Storage Bin Cover Emergency Release is built into the storage bin cover latching mechanism. NOTE: In the event of an individual being locked inside the storage bin, the storage bin cover can be opened from inside of the bin by pulling on the glow-in-the-dark lever attached to the storage bin cover latching mechanism. Bed Extender • The bed extender has three functional positions: • Storage Position • Divider Position • Extender Position Storage Position • The storage position for the bed extender is at the front of the truck bed. • To install the bed extender into the storage position, perform the following: • Make sure the center handle is unlocked using the vehicle key and rotate the center handle vertically to release the extender side gates. • With the side gates open, position the extender fully forward in the bed against the front panel. 58