2014 Dodge Dart Owner Manual - Page 137

UNDERSTANDING THE FEATURES OF YOUR VEHICLE 135 Voice Command Button Operation but- Voice commands can be used to operate the Uconnect® When you press the Voice Command ton you will hear a BEEP. The beep is your Phone and to navigate through the Uconnect® Phone menu structure. Voice commands are required after most signal to give a command. Uconnect® Phone prompts. You will be prompted for a The Uconnect® Phone can be used with any Hands-Free specific command and then guided through the available Profile certified Bluetooth® mobile phone. See the options. Uconnect® website for supported phones. Refer to your mobile service provider or the phone manufacturer for • Prior to giving a voice command, one must wait for the beep. details. The Uconnect® Phone is fully integrated with the vehi- • For certain operations, compound commands can be used. For example, instead of saying "Setup", "Device cle's audio system. The volume of the Uconnect® Phone Pairing" and then "Pair a Device", the following can be adjusted either from the radio volume control compound command can be said: "Setup", "Device knob or from the steering wheel radio control (right Pairing" and "Pair a Bluetooth® Device". switch), if so equipped. The radio display will be used for visual prompts from • For each feature explanation in this section, only the compound form of the voice command is given. You the Uconnect® Phone such as "Phone" or caller ID. can also break the commands into parts and say each 3