2014 Dodge Dart Owner Manual - Page 432

430 STARTING AND OPERATING 6. Shift into the desired gear range. If the problem is no PARK (refer to "Brake/Transmission Shift Interlock Syslonger detected, the transmission will return to normal tem" in this section). To drive, press the lock button on the front of the shift lever and move the shift lever from operation. PARK or NEUTRAL to the DRIVE position. NOTE: Even if the transmission can be reset, we recommend that you visit your authorized dealer at your The electronically-controlled transmission provides a earliest possible convenience. Your authorized dealer has precise shift schedule. The transmission electronics are diagnostic equipment to determine if the problem could self-calibrating; therefore, the first few shifts on a new vehicle may be somewhat abrupt. This is a normal recur. condition, and precision shifts will develop within a few If the transmission cannot be reset, authorized dealer hundred miles (kilometers). service is required. Only shift from DRIVE to PARK or REVERSE when the Six-Speed Automatic Transmission (2.0L And accelerator pedal is released and the vehicle is stopped. 2.4L Engine Only - 6F24) Be sure to keep your foot on the brake pedal when The transmission gear position display (located in the shifting between these gears. instrument panel cluster) indicates the transmission gear The transmission shift lever has PARK, REVERSE, NEUrange. You must press the brake pedal and the lock TRAL, DRIVE, and AutoStick® shift positions. Manual button on the shift lever to move the shift lever out of shifts can be made using the AutoStick® shift control