2014 Dodge Dart Owner Manual - Page 411

STARTING AND OPERATING 409 NOTE: If the ignition switch is left in the ACC or RUN (engine not running) position and the transmission is in PARK, the system will automatically time out after 30 1. Place the shift lever/shift selector in PARK, then press minutes of inactivity and the ignition will switch to the and release the ENGINE START/STOP button. OFF position. 2. The ignition switch will return to the OFF position. ENGINE START/STOP Button Functions - With 3. If the shift lever/shift selector is not in PARK, the Driver's Foot OFF The Brake Pedal (In PARK Or ENGINE START/STOP button must be held for two NEUTRAL Position) seconds or three short presses in a row with the The ENGINE START/STOP button operates similar to an vehicle speed above 5 mph (8 km/h) before the engine ignition switch. It has four positions, OFF, ACC, RUN will shut off. The ignition switch position will remain and START. To change the ignition positions without in the ACC position until the shift lever/shift selector starting the vehicle and use the accessories follow these is in PARK and the button is pressed twice to the OFF steps: position. If the shift lever/shift selector is not in PARK and the ENGINE START/STOP button is pressed • Starting with the ignition in the OFF position, once, the EVIC (if equipped) will display a "Vehicle • Press the ENGINE START/STOP button once to place Not In Park" message and the engine will remain the ignition to the ACC position (EVIC will display running. Never leave a vehicle out of the PARK "ACC"), position, or it could roll. To Turn Off The Engine Using ENGINE START/STOP Button 5