2014 Dodge Dart Owner Manual - Page 248

246 UNDERSTANDING THE FEATURES OF YOUR VEHICLE if the headlight switch is placed in the AUTO position. In Settings 1 and 2 can be used if the driver desires less addition, the headlights will turn off when the wipers are wiper sensitivity. Setting 4 can be used if the driver desires more sensitivity. The rain sense wipers will turned off if they were turned on by this feature. automatically change between an intermittent wipe, slow The Headlights On with Wipers feature can be turned on wipe and a fast wipe depending on the amount of and off using the Uconnect® System, refer to "Uconnect® moisture that is sensed on the windshield. Place the Settings" in "Understanding Your Instrument Panel" for wiper switch in the OFF position when not using the further information. system. Rain Sensing Wipers - If Equipped The Rain Sensing feature can be turned on and off using This feature senses moisture on the windshield and the Uconnect® System, refer to "Uconnect® Settings" in automatically activates the wipers for the driver. The "Understanding Your Instrument Panel" for further infeature is especially useful for road splash or over spray formation. from the windshield washers of the vehicle ahead. Rotate NOTE: the end of the multifunction lever to one of four settings to activate this feature. • The Rain Sensing feature will not operate when the wiper speed is in the low or high position. The sensitivity of the system can be adjusted with the multifunction lever. Wiper delay position 1 is the least sensitive, and wiper delay position 4 is the most sensitive. Setting 3 should be used for normal rain conditions.