2014 Dodge Dart Owner Manual - Page 410

408 STARTING AND OPERATING • If the key will not turn and the steering wheel is Normal Starting locked, rotate the wheel in either direction to relieve Using The ENGINE START/STOP Button pressure on the locking mechanism and then turn the 1. The transmission must be in PARK or NEUTRAL. key. 2. Press and hold the brake pedal while pressing the ENGINE START/STOP button once. The shift lever must be in the PARK or NEUTRAL position before you can start the engine. Depress the 3. The system takes over and attempts to start the brake pedal before shifting to any driving gear. vehicle. If the vehicle fails to start, the starter will disengage automatically after 10 seconds. NOTE: You must press the brake pedal before shifting Automatic Transmission - If Equipped out of PARK. Keyless Enter-N-Go 4. If you wish to stop the cranking of the engine prior to the engine starting, press the button again. This feature allows the driver to oper- NOTE: Normal starting of either a cold or a warm engine ate the ignition switch with the push is obtained without pumping or pressing the accelerator of a button, as long as the Remote pedal. Keyless Entry (RKE) transmitter is in the passenger compartment.