1998 Ford Windstar Owner Guide 1st Printing - Page 165
1998 Ford Windstar Manual
Page 165 highlights
Seating and Safety Restraints To switch the retractor from the emergency locking mode to the automatic locking mode, perform the following steps: 1. Buckle the lap/shoulder combination belt. 2. Grasp the shoulder portion of the belt and pull downward until all of the belt is extracted, and when allowed to retract, a clicking sound will be heard. At this time, the belt retractor is in the automatic locking mode (child restraint mode). 3. A clicking sound will be heard as the belt is allowed to retract. This indicates that the retractor is in the automatic locking mode. NOTE: When the combination lap/shoulder belt is unbuckled and allowed to retract completely, the retractor will switch back to the vehicle sensitive (emergency) locking mode. See detailed instructions under Safety Seats for Children later in this chapter. Lap Belts The lap belt in the center of the rear seat does not adjust automatically. You must adjust it to fit snugly and as low as possible around your hips. Do not wear it around your waist. If you need to lengthen the belt, unfasten it and tip the belt tongue at a right angle to the belt. Pull the belt tongue over your lap until it reaches the buckle. If you need to shorten the belt, pull on the loose end of the webbing until the belt fits snugly. To unfasten the belt, push the release button on the buckle. 165