2014 Ford Fusion Energi Owner Manual Printing 1 - Page 258
2014 Ford Fusion Energi Manual
Page 258 highlights
Maintenance E159696 E159699 6. Remove the three front bumper cover lower fasteners, only on the side of headlamp being serviced. 9. Carefully pull the headlamp assembly outward to disengage it from the lower fixing point. 10. Carefully lift the headlamp and remove from vehicle. 11. Disconnect the electrical connector. CHANGING A BULB Lamp Assembly Condensation Exterior lamps are vented to accommodate normal changes in pressure. Condensation can be a natural by-product of this design. When moist air enters the lamp assembly through the vents, there is a possibility that condensation can occur when the temperature is cold. When normal condensation occurs, a thin film of mist can form on the interior of the lens. The thin mist eventually clears and exits through the vents during normal operation. Clearing time may take as long as 48 hours under dry weather conditions. Examples of acceptable condensation are: • Presence of thin mist (no streaks, drip marks or droplets). • Fine mist covers less than 50% of the lens. E159697 7. Separate the front bumper cover from the fender, pull the fender outward 3 cm. E159698 8. From the front of the vehicle, pull the front bumper cover forward 10 cm. 255
![](/manual_guide/autos/Ford-2014-Fusion-Energi-Owner-Manual-Printing-1-58a8c6/258.png)