2014 Ford Fusion Energi Owner Manual Printing 1 - Page 406
2014 Ford Fusion Energi Manual
Page 406 highlights
MyFord Touch™ (If Equipped) Default This displays the charging mode and off-peak times for your Default Value Charge profile. The system displays off-peak times for weekdays; the remaining hours of the day are considered peak time. The system displays similar off-peak times for weekend days. • Charge Now if you want your vehicle to immediately charge when you plug it in at this profile location. • Value Charge if you want to take advantage of off-peak electricity rates. The vehicle optimizes the charge schedule to be complete by the next GO Time. • Edit to access your Default Value Charge Profile settings screen (see Default Value Charge Profile later in this section). Customer Defined Value Charge Profiles Once you create profile names, this section displays the Value Charge Profile names and current Charge Mode for specific locations. You can set up and edit these profiles using the MyFord Mobile internet or smartphone application. You can program up to nine unique charge profiles. Default Value Charge Profile Weekday and Weekend Touch the Edit button to set the off-peak charge times. Set the Weekday times and Weekend time (by touching the Weekday and Weekend buttons), then touch Save. The system does not store your settings until you make selections for both Weekday and Weekend. If you touch the back arrow button to return to the previous screen without saving your settings, the system does not store them and you need to enter them again. Start and Finish These buttons display the times, which you can modify, using the following: • + and - allow you to change the hours of your start and finish times. • AM and PM allow you to change the time of your start and finish time. This setting is viewable in 12-hour mode. 240V and 120V These represent the voltage service the default profile is using. The system uses this selection to calculate estimated charge times. Clear Touching this button erases the Default Value Charge preferences. Save All Touching this button stores your Default Value Charge preferences Note: Make sure you save your settings before returning to the previous screen. If you do not touch Save, your settings are not stored in the system. 403