2014 Ford Fusion Energi Owner Manual Printing 1 - Page 402
2014 Ford Fusion Energi Manual
Page 402 highlights
MyFord Touch™ (If Equipped) A B My GO Time summary displays the next GO Time and cabin temperature setting. Estimated charge time limits displays the estimated minimum and maximum times to fully charge the high-voltage battery and the battery's present state of charge as a percentage of total capacity. Charge profile and mode displays the charging profile and charging mode for the vehicle's present location. Charging status and actual times displays charging status with the charging start time, end time, and duration. The system also alerts you to any conflicts by highlighting areas of the screen in yellow. If your battery cannot have a full charge by the scheduled drive time, the system highlights your next GO Time and Charge Complete time and a message Charge at GO Time: under 100% appears. This is normal; the vehicle is informing you of the conflicting situation. This notification only displays when the gearshift selector lever is in position P. Note: Charging occurs as soon as you plug the vehicle in. The system limits cabin conditioning to 15 minutes before your GO Time. To eliminate the conflict notification immediately or to prevent a conflict in the future, try the following: • Change the present GO Time to occur later. • Plug the vehicle into a 240V charging station instead of the 120V convenience cord. Higher power charging yields shorter charge times. • Plug the vehicle in sooner. Estimated Charge Time Limits Battery This shows you the battery's current charge displayed as a percentage. A reading of 100% means the battery has a full charge. A reading of 0% indicates the battery has no plug-in energy left. C D My GO Time Summary GO Time This is the time and date of your next set drive time. Your vehicle automatically schedules charging and cabin conditioning to finish by this time. Temperature This is the chosen cabin conditioning setting for this GO Time. Skip This cancels the cabin conditioning for the present GO Time. Once you touch Skip, the GO Time and Temperature grey out, and the LED illuminates on the Skip button. Touch the button again to turn on the cabin conditioning. This feature allows you to ignore the present GO Time without having to delete it or having to turn off the entire schedule (see GO Time Schedule later in this section). After the present GO Time passes, the Skip feature resets. Edit This accesses your GO Time Schedule (see GO Time Schedule later in this section). 399