2015 Ford Transit 150 Van Owner Manual Printing 3 - Page 149

Cruise Control PRINCIPLE OF OPERATION WARNING The system does not relieve you of your responsibility to drive with due care and attention. Cruise control allows you to control your speed using the switches on the steering wheel. You can use cruise control when you exceed approximately 20 mph (30 km/h). E142437 USING CRUISE CONTROL WARNINGS Do not use cruise control in heavy traffic, on winding roads or when the road surface is slippery. This could result in loss of vehicle control, serious injury or death. When you are going downhill, your vehicle speed may increase above the set speed. The system will not apply the brakes. Change down a gear to assist the system in maintaining the set speed. Failure to do so could result in loss of vehicle control, serious injury or death. Note: Cruise control will disengage if your vehicle speed decreases more than 10 mph (16 km/h) below your set speed while driving uphill. The cruise controls are located on the steering wheel. Switching Cruise Control On Press and release ON. The indicator will display in the instrument cluster. E71340 Setting a Speed 1. Accelerate to the desired speed. 2. Press and release SET+. 3. Take your foot off the accelerator pedal. Changing the Set Speed • Press and hold SET+ or SET-. Release the control when you reach the desired speed. Press and release SET+ or SET-. The set speed will change in approximately 1 mph (2 km/h) increments. Press the accelerator or brake pedal until you reach the desired speed. Press and release SET+. • • Canceling the Set Speed Pull CAN toward you and release, or tap the brake pedal. The set speed will not be erased. 146 Transit (TTH) Canada/United States of America, enUSA, Edition date: 03/2014, Third Printing