2015 Ford Transit 150 Van Owner Manual Printing 3 - Page 47

Keys and Remote Controls Integrated Key head Transmitter E138615 Note: Your vehicle's keys came with a security label that provides important vehicle key cut information. Keep the label in a safe place for future reference. E138619 1. Twist a thin coin in the slot of the transmitter near the key ring to remove the battery cover. 2. Remove the old battery. Programming a New Remote Control To program an additional remote control See Passive Anti-Theft System (page 58). Replacing the Battery The remote control uses one coin type three volt lithium battery CR2032 or equivalent. Note: Refer to local regulations when disposing of transmitter batteries. Note: Do not wipe off any grease on the battery terminals or on the back surface of the circuit board. Note: Replacing the battery will not delete the transmitter from the vehicle. The transmitter should operate normally. E138620 3. Insert the new battery. Refer to the instructions inside the transmitter for the correct orientation of the battery. Press the battery down to make sure it is fully in the housing. 4. Snap the battery cover back onto the transmitter. Car Finder Press the lock button on the key twice within three seconds. The horn sounds and the direction indicators will flash. We recommend you use this method to locate your vehicle, rather than using the panic alarm. 44 Transit (TTH) Canada/United States of America, enUSA, Edition date: 03/2014, Third Printing