2015 Ford Transit 150 Van Owner Manual Printing 3 - Page 215

Maintenance If the Engine Does Not Start or Runs Rough 1 7 E177379 E184789 Rotate the housing clockwise aligning the arrows in the lock position. 8. Purge air from the system. Note: Only add fuel that meets the Ford specification. See Fuel and Refueling (page 109). 7. Purging Air From the Fuel System 1. 2. 3. 4. 5. 6. 7. Switch the ignition on for at least 30 seconds then switch the ignition off. Repeat this process six times. Start the engine and maintain engine speed at 1500 RPM. Wait 20 seconds. If the engine is running smoothly, reduce the engine speed to idle. Check for leaks. Switch the ignition off. 1. Remove the Schrader valve cap. 2. Attach suitable tool with a tube to the Schrader valve and place the end of the tube into a suitable container. 3. Open the Schrader valve. 4. Switch the ignition on until a steady stream of fuel can be seen coming out of the tube. 5. Switch the ignition off. 6. Remove the tool from the Schrader valve. 7. Refit the Schrader valve cap. 8. Switch the ignition on for at least 30 seconds then switch the ignition off. 9. Repeat this process three times. 10. Start the engine. FUEL FILTER - GASOLINE Your vehicle is equipped with a lifetime fuel filter that is integrated with the fuel tank. Regular maintenance or replacement is not needed. 212 Transit (TTH) Canada/United States of America, enUSA, Edition date: 03/2014, Third Printing