2015 Ford Transit 150 Van Owner Manual Printing 3 - Page 266

Wheels and Tires WARNINGS Make sure the wheel and hub contact surfaces are free from foreign material. Never use wheels or lug nuts different than the original equipment as this could damage the wheel or mounting system. This damage could allow the wheels to come off when your vehicle is moving. 1. Install the wheel. 3. Lower your vehicle and remove the vehicle jack. 4. Fully tighten all of the lug nuts in the sequence shown. 5. Install the wheel trim. Note: Make sure that the cones on the lug nuts are against the wheel. Note: Alloy wheel lug nuts are suitable for use on a steel spare wheel. Note: If the spare wheel is not the same type and size as your vehicle road wheel replace it as soon as possible. Note: Check the lug nuts for correct tightness and check the tire pressure as soon as possible. 1 3 4 Stowing the Wheel and Vehicle Jack Note: Do not raise the spare wheel bracket without a wheel attached. Damage can occur to the winch mechanism if the spare wheel bracket is lowered without a wheel attached. 5 6 2 1 1. 2. 4 3 3. 4. 2 E70961 5 5. 2. Install all of the lug nuts and partially tighten them in the sequence shown. Attach the spare wheel bracket to the wheel using the retaining nut. Slide the cable through the slot and attach the spare wheel bracket to the winch. Rotate the cable through 90 degrees and lower the cable end cover. Insert the flat end of the lug wrench into the socket. Turn it clockwise until you feel a strong resistance. Make sure the wheel is secure. Stow the vehicle jack, jack handle and lug wrench in their correct locations and secure them with the straps. 263 Transit (TTH) Canada/United States of America, enUSA, Edition date: 03/2014, Third Printing