2015 Ford Transit 150 Van Owner Manual Printing 3 - Page 218

Maintenance Install in the reverse order. Note: The windshield wiper blades are different in length. If you install wiper blades of the wrong length, the rain sensor may not work correctly. CHECKING THE WIPER BLADES ADJUSTING THE HEADLAMPS Vertical Aim Adjustment If your vehicle has been involved in a crash, have the aim of the headlamp beam checked by an authorized dealer. E142463 Headlamp Aiming Target Run the tip of your fingers over the edge of the blade to check for roughness. Clean the wiper blades with washer fluid or water applied with a soft sponge or cloth. CHANGING THE WIPER BLADES Changing the Windshield Wiper Blades Lift the wiper arm. E142592 A B 8 feet (2.4 meters) Ground to the center of the headlamp bulb 25 feet (7.6 meters) Horizontal reference line 2 C D Vertical Aim Adjustment Procedure 1 E72899 1. Press the locking button. 2. Remove the wiper blade. 3. Install in the reverse order. Make sure that the wiper blade locks into place. 1. Park your vehicle on level ground approximately 25 feet (7.6 meters) from a wall or screen. 2. Measure the distance from the ground to the center of the headlamp bulb and mark an 8 foot (2.4 meter) long horizontal reference line on the wall or screen at this height. 215 Transit (TTH) Canada/United States of America, enUSA, Edition date: 03/2014, Third Printing