2004 Honda Civic Owner's Manual - Page 134

Automatic Transmission To shift from: P to R R to P N to R D3 to 2 2 to D3 D3 to D D to N D to D3 N to D R to N Do this: Press the brake pedal and press the release button. Press the release button. To avoid transmission damage, come to a complete stop before shifting into Park. The shift lever must be in Park before you can remove the key from the ignition switch. Reverse (R) Press the brake pedal and press the release button to the front of shift lever to shift from Park to Reverse. To shift from Reverse to Neutral, come to a complete stop and then shift. Neutral (N) Use Neutral if you need to restart a stalled engine, or if it is necessary to stop briefly with the engine idling. Shift to the Park position if you need to leave your vehicle for any reason. Press on the brake pedal when you are moving the shift lever from Neutral to another gear. Drive (D) Use this position for your normal driving. The transmission automatically selects a suitable gear for your speed and acceleration. You may notice the transmission shifting up at higher speeds when the engine is cold. This helps the engine warm up faster. Drive (D3) This position is similar to D, except only the first three gears are selected. Use D3 to provide engine braking when going down a steep hill. D3 can also keep the transmission from cycling between third and fourth gears in stop-and-go driving. Move the lever. Park (P) This position mechanically locks the transmission. Use Park whenever you are turning off or starting the engine. To shift out of Park, you must press on the brake pedal and have your foot off the accelerator pedal. If you have done all of the above and still cannot move the lever out of Park, see Shift Lock Release on page 133 . CONTINUED Driving 131