2008 Honda S2000 Owner's Manual - Page 100

Main Menu Table Of Contents Vents, Heating, and A/C Airflow Controls Fan Control Lever Push this lever up and down to increase or decrease the fan speed and airflow. The indicators next to the lever show you the speed and airflow selected. Temperature Control Dial Turning this dial clockwise increases the temperature of the airflow. Air Conditioning (A/C) Button This button turns the air conditioning on and off. The indicator in the button comes on when the A/C is on. Recirculation Button When the recirculation indicator is on, air from the vehicle's interior is sent through the system again (recirculation mode). When the indicator is off, air is brought in from the outside of the vehicle (fresh air mode). The outside air intakes for the heating and cooling system are at the base of the windshield. Keep this area clear of leaves and other debris. The system should be left in fresh air mode under almost all conditions. Keeping the system in recirculation mode, particularly with the A/C off, can cause the windows to fog up. Switch to recirculation mode when driving through dusty or smoky conditions, then return to fresh air mode. Rear Window Defogger Button This button turns the rear window defogger off and on (see page 61 ). Do not push the defogger button when the convertible top is folded. CONTINUED Mode Control Dial Use the mode control dial to select the vents the air flows from. Some air will flow from the dashboard vents in all modes. Air flows from the vents on both sides of the instrument panel, and from the dashboard vent in front of the passenger. Airflow is divided between the vents in the dashboard and the floor vents. Air flows from the center vents in the dashboard above the audio system, the vents on both sides of the instrument panel, and from the floor vents. Select this position when you drive with the convertible top folded. Features 2008 S2000 97