2008 Honda S2000 Owner's Manual - Page 105

Main Menu Table Of Contents Vents and Heating Air flows from the center vents in the dashboard, the vents on both sides of the instrument panel, and from the floor vents. Select this position when you drive with the removable hardtop removed. Air flows from the floor vents and the vents on both sides of the instrument panel. Airflow is divided between the floor vents and the defroster vents at the base of the windshield, and the vents on both sides of the instrument panel. Air flows from the defroster vents at the base of the windshield and the vents on both sides of the instrument panel. When you select or , the system automatically switches to Fresh Air mode. Ventilation The flow-through ventilation system draws in outside air, circulates it through the interior, then exhausts it through vents behind the seat-backs. 1. Set the temperature to the lower limit. and fresh air mode. 2. Select 3. Set the fan to the desired speed. Using the Heater The heater uses engine coolant to warm the air. If the engine is cold, it will be several minutes before you feel warm air coming from the system. and fresh air mode. 1. Select 2. Set the fan to the desired speed. 3. Adjust the warmth of the air with the temperature control dial. To Defog and Defrost To remove fog from the inside of the windows: 1. Set the fan to the desired speed, or high for faster defrosting. . The system 2. Select automatically switches to fresh air mode. 3. Adjust the temperature so the airflow feels warm. to help clear the 4. Select rear window. 5. To increase airflow to the windshield, close the corner vents. When you select or , the system automatically turns on the fresh air mode. This helps to defog the windshield. 102 2008 S2000