2008 Honda S2000 Owner's Manual - Page 62
2008 Honda S2000 Manual
Page 62 highlights
Main Menu Table Of Contents Turn Signals and Headlights Turn Signal Push down on the lever to signal a left turn and up to signal a right turn. To signal a lane change, push lightly on the lever, and hold it. The lever will return to center when you release it or complete a turn. Headlights On Turning the switch to the position turns on the parking lights, taillights, instrument panel lights, side-marker lights, and rear license plate lights. 1. Turn Signal 2. Off 3. Parking and indicator lights 4. Headlights on 5. High beams 6. Flash high beams Turning the switch to the position turns on the headlights. If you leave the lights on with the key removed from the ignition switch, you will hear a reminder buzzer when you open the driver's door. High Beams Push the lever forward until you hear a click. The high beam indicator will come on (see page 49 ). Pull the lever back to return to the low beams. Instruments and Controls To flash the high beams, pull the lever back lightly, then release it. The high beams will stay on as long as you hold the lever back. Daytime Running Lights With the headlight switch off, the high beam headlights and the high beam indicator come on with reduced brightness when you turn the ignition switch to the ON (II) position and release the parking brake. They remain on until you turn the ignition switch off, even if you set the parking brake. The headlights revert to normal operation when you turn them on with the switch. 2008 S2000 59