2008 Honda S2000 Owner's Manual - Page 226
2008 Honda S2000 Manual
Page 226 highlights
Main Menu Table Of Contents Fuses Checking and Replacing Fuses If something electrical in your vehicle stops working, check for a blown fuse first. Determine from the chart on pages 226 and 227 , or the diagram on the fuse box lid, which fuse or fuses control that device. Check those fuses first, but check all the fuses before deciding that a blown fuse is the cause. Replace any blown fuses, and check if the device works. 1. Turn the ignition switch to the LOCK (0) position. Make sure the headlights and all other accessories are off. 2. Remove the cover from the fuse box. BLOWN FUSE PULLER 3. Check each of the large fuses in the primary under-hood fuse box by looking through the top at the wire inside. Removing these fuses requires a Phillips-head screwdriver. 4. Check the smaller fuses in the under-hood fuse boxes and all the fuses in the interior fuse box by pulling out each one with the fuse puller provided in the interior fuse box. Taking Care of the Unexpected CONTINUED 2008 S2000 223