2008 Honda S2000 Owner's Manual - Page 187

Main Menu Table Of Contents Lights, Cleaning the Seat Belts 7. Install the new bulb into the socket. 8. Push the socket into the light assembly, and turn it clockwise until it locks. 9. Turn on the lights to make sure the new bulb is working. Cleaning the Seat Belts If your seat belts get dirty, use a soft brush with a mixture of mild soap and warm water to clean them. Do not use bleach, dye, or cleaning solvents. Let the belts air-dry before you use the vehicle. Dirt build-up in the loops of the seat belt anchors can cause the belts to retract slowly. Wipe the insides of the loops with a clean cloth dampened in mild soap and warm water or isopropyl alcohol. 10.Install the trunk lining, and secure it with the fasteners. To reinstall a fastener, reset the fastener by pushing on the pointed end until it pops back almost flush with the fingers on the housing. Put the fastener in the hole of the trunk lining, and push on the center until it locks (the center is flush with the head). 184 2008 S2000