2010 Honda Fit Owner's Manual - Page 117
2010 Honda Fit Manual
Page 117 highlights
Vents, Heating, and A/C Airflow Controls Fan Control Dial Turn this dial to increase or decrease the fan speed and airflow. Temperature Control Dial Turning this dial clockwise increases the temperature of the airflow. Air Conditioning (A/C) Button If equipped The outside air intakes for the heating and cooling system are at the base of the windshield. Keep this area clear of leaves and other debris. The system should be left in fresh air mode under almost all conditions. Keeping the system in recirculation mode, particularly with the A/C off, can cause the windows to fog up. Switch to recirculation mode when driving through dusty or smoky conditions, then return to fresh air mode. Rear Window Defogger Button / This button turns the rear window defogger on and off (see page 76). On some models, this button also operates the heated outside mirrors (see page 102). Mode Control Dial Use the mode control dial to select the vents the air flows from. Some air will flow from the dashboard corner vents in all modes. Air flows from the center and corner vents in the dashboard. Airflow is divided between the vents in the dashboard and the floor vents. Air flows from the floor vents. Airflow is divided between the floor vents and defroster vents at the base of the windshield. Air flows from the defroster vents at the base of the windshield. Features This button turns the air conditioning on and off. The indicator in the button is on when the A/C is on. Fresh Air/Recirculation Lever This lever controls the source of the air going into the system. When you side, air is slide the lever to the brought in from outside the vehicle (fresh air mode). When you select side, air from the vehicle's the interior is sent through the system again (recirculation mode). CONTINUED 111