2010 Honda Fit Owner's Manual - Page 81

Headlights Headlights － Turning the switch to '' position turns on the the '' parking lights, taillights, instrument panel lights, side-marker lights, and rear license plate lights. '' Turning the switch to the '' position turns on the headlights. When the light switch is in the '' position, the lights '' or '' '' on indicator comes on as a reminder. This indicator stays on if you leave the light switch on and turn the ignition switch to the ACCESSORY (I) or the LOCK (0) position. If you leave the lights on with the key removed from the ignition switch, you will hear a reminder chime when you open the driver's door. High Beams － Push the lever forward and the high beam indicator will come on (see page 65). Pull it back to return to low beams. To flash the high beams, pull the lever back lightly, then release it. The high beams will stay on as long as you hold the lever back. Fog Lights On Sport model Daytime Running Lights With the headlight switch off or in position, the high beam the headlights and the high beam indicator come on with reduced brightness when you turn the ignition switch to the ON (II) position and release the parking brake. They remain on until you turn the ignition switch off, even if you set the parking brake. The headlights revert to normal operation when you turn them on with the switch. Instruments and Controls Turn the fog lights on and off by turning the switch next to the headlight switch. You can use the fog lights only when the headlights are on low beam. They will go off when the headlights are turned off. 75