2010 Honda Fit Owner's Manual - Page 184

Playing a USB Flash Memory Device (Models with navigation system) To Play a USB Flash Memory Device This audio system can operate the audio files on a USB flash memory device with the same controls used for the in-dash disc player. To play a USB flash memory device, connect it to the USB adapter cable in the upper glove box, then press the CD/ AUX button. The ignition switch must be in the ACCESSORY (I) or ON (II) position. The audio system reads and plays the audio files on the USB flash memory device in MP3, WMA or AACꭧ formats. Depending on the format, the display shows MP3, WMA or AAC when a USB flash memory device is playing. The USB flash memory device limit is up to 700 folders or up to 65535 files. ꭧ: Only AAC format files recorded with iTunes are playable on this audio unit. The recommended USB flash memory devices are 256 Mbyte or higher, and formatted with the FAT file system. Some digital audio players may be compatible as well. Some USB flash memory device (such as devices with security lockout features, etc.) will not work in this audio unit. NOTE: ● ● We recommend backing up your data before playing a USB flash memory device. Depending on the type and number of files, it may take some time before they begin to play. Depending on the software the files were made with, it may not be possible to play some files, or display some text data. ● ● Do not use a device such as a card reader or hard drive as the device or your files may be damaged. Do not connect your USB flash memory device using a HUB. Do not use an extension cable to the USB adapter cable equipped with your vehicle. Do not keep the USB flash memory device in the vehicle. Direct sunlight and high heat will damage it. Voice Control System ● You can select the AUX mode by using the navigation system voice control buttons, but cannot operate the play mode functions. The specifications for compatible MP3 files are: - Sampling frequency: 32/44.1/48 kHz (MPEG1) 16/22.05/24 kHz (MPEG2) ● ● 178