2010 Honda Fit Owner's Manual - Page 313

Fuses Checking and Replacing Fuses If something electrical in your vehicle stops working, check for a blown fuse first. Determine from the chart on pages 309 and 310, or the diagram on the fuse label, which fuse or fuses control that device. Check those fuses first, but check all the fuses before deciding that a blown fuse is the cause. Replace any blown fuses, and check if the device works. 1. Turn the ignition switch to the LOCK (0) position. Make sure the headlights and all other accessories are off. 2. On the under-hood fuse box, remove the cover from the fuse box. On the interior fuse box, pull the fuse lid toward you. FUSE BLOWN FUSE PULLER 3. Check each of the large fuses in the under-hood fuse box and the interior fuse box by looking through the top at the wire inside. 4. Check all smaller fuses in the interior fuse box by pulling out each one with the fuse puller provided in the interior fuse box. Taking Care of the Unexpected CONTINUED 307