2008 Infiniti EX35 Owner's Manual - Page 159

HOW TO USE INFINITI CONTROLLER Choose an item on the display using the main directional buttons 2 (or additional directional buttons 6 with navigation system) or center dial 3 , and push the ENTER button 1 for operation. If you push the BACK button 4 before the setup is completed, the setup will be canceled and/or the display will return to the previous screen. This button can also be used to delete characters that have been input. After the setup is completed, push the BACK button 4 and return to the previous screen. For the VOICE button 5 functions, refer to the separate Navigation System Owner's Manual. ● To clean the display, never use a rough cloth, alcohol, benzine, thinner or any kind of solvent or paper towel with a chemical cleaning agent. They will scratch or deteriorate the panel. ● Do not splash any liquid such as water or car fragrance on the display. Contact with liquid will cause the system to malfunction. To ensure safe driving, some functions cannot be operated while driving. The on-screen functions that are not available while driving will be "grayed out" or muted. Park the vehicle in a safe location and then operate the navigation system. SAA1542 Touch screen operation With this system, the same operations as those for the INFINITI controller are possible using the touch screen operation. Selecting the item : Touch an item to select. When you select the "Audio" settings, touch the "Audio" area 1 on the screen. Touch the BACK 2 button to return the previous screen. HOW TO USE TOUCH SCREEN (models with navigation system) CAUTION ● The glass screen on the liquid crystal display may break if it is hit with a hard or sharp object. If the glass breaks, do not touch the liquid crystalline material, which contains a small amount of mercury. In case of contact with skin, wash immediately with soap and water. Monitor, climate, audio, phone and voice recognition systems 4-5