2008 Infiniti EX35 Owner's Manual - Page 93
2008 Infiniti EX35 Manual
Page 93 highlights
Each time the switch A is pushed, the Speed : The average speed mode shows the average vehicle speed since the last reset. Resetting is done by pushing the switch B for longer than 1 second. (The average fuel consumption is also reset at the same time.) The display is updated every 30 seconds. The first 30 seconds after a reset, the display shows display will change as follows: Current fuel consumption → Average fuel consumption and speed → Elapsed time and trip odometer → Distance to empty (dte) → Outside air temperature (ICY) → Setting → Warning check 4. Distance to empty (dte - mls or km) The distance to empty (dte) mode provides you with an estimation of the distance that can be driven before refueling. The dte is constantly being calculated, based on the amount of fuel in the fuel tank and the actual fuel consumption. The display is updated every 30 seconds. The dte mode includes a low range warning feature. If the fuel level is low, the warning is displayed on the screen. When the fuel level drops even lower, the dte display will change to If the amount of fuel added is small, the display just before the ignition switch is pushed to the OFF position may continue to be displayed. ● When driving uphill or rounding curves, the fuel in the tank shifts, which may momentarily change the display. 1. Current fuel consumption The current fuel consumption mode shows the current fuel consumption. 2. Average fuel consumption (MPG or l (liter)/100 km) and speed (MPH or km/h) Fuel consumption : The average fuel consumption mode shows the average fuel consumption since the last reset. Resetting is done by pushing the switch B for longer than 1 second. (The average speed is also reset at the same time.) 3. Elapsed time and trip odometer (mls or km) Elapsed time : The elapsed time mode shows the time since the last reset. The displayed time can be reset by pushing the switch B for longer than 1 second. (The trip odometer is also reset at the same time.) Trip odometer : The trip odometer mode shows the total distance the vehicle has been driven since the last reset. Resetting is done by pushing the switch B for longer than 1 second. (The elapsed time is also reset at the same time.) The display is updated every 30 seconds. At about the first 1/3 mile (500 m) after a reset, the display shows Instruments and controls 2-25