2008 Infiniti EX35 Owner's Manual - Page 189
2008 Infiniti EX35 Manual
Page 189 highlights
● This function is designed as an aid to the driver in detecting large stationary objects to help avoid damaging the vehicle. The system will not detect small objects below the bumper, and may not detect objects close to the bumper or on the ground. ● If your vehicle sustains damage to the bumper fascia, leaving it misaligned or bent, the sensing zone may be altered causing inaccurate measurement of obstacles or false alarms. Default to Front-Side View: With this item turned to ON, the front-side view is initially displayed instead of the bird-eye view when the Around View Monitor is displayed. Corner Sonar Sensitivity: Adjust the sensitivity level of the corner sonar sensor higher (right) or lower (left). Blind-Area Reminder: With this item turned to ON, the non-viewable area is highlighted in yellow for 7 seconds after the bird-eye view is displayed. SAA1844 CAUTION Keep the interior of the vehicle as quiet as possible to hear the tone clearly. AROUND VIEW MONITOR SETTINGS To set up the Around View Monitor to your preferred settings, push the SETTING button, select "Others" using the INFINITI controller and push the ENTER button. Then select the "Camera" key and push the ENTER button. Predictive Course Line: When this item is turned to ON, the predictive course line is displayed in the front and the rear view. Sonar Display: When this item is turned to ON, the corner sonar indicator is displayed in the front-side view. HOW TO ADJUST THE SCREEN VIEW To adjust the Display ON/OFF, Brightness, Tint, Color, Contrast and Black Level of the Around View Monitor, push the SETTING button with the Around View Monitor on, select the item key and adjust the level using the INFINITI controller. Do not adjust the Brightness, Tint, Color, Contrast and Black Level of the Around View Monitor while the vehicle is moving. Make sure the parking brake is firmly applied. OPERATING TIPS ● The screen displayed on the Around View Monitor will automatically return to the previous screen 3 minutes after the CAMERA button has been pushed while the shift lever is in a position other than the R (Reverse) position. ● The display of images on the screen may be delayed after screens are switched. Objects in the Around View Monitor may be distorted momentarily until the Around View Monitor screen is displayed completely. Monitor, climate, audio, phone and voice recognition systems 4-35